PV5300 - Motorola PV5300 PCI/ISA CPU Board with Intel Pentium II Mobile...
- Part Number:
- PV5300
- Model Number:
- PV5300
- Make:
- MOTOROLA
- Lead Time:
- Available
- Qty In Stock:
- Available
Motorola PV5300 PCI/ISA CPU Board with Intel Pentium II Mobile processor, Dual LAN, Ultra SCSI and dual EIDE Simple Type: CPU Board
Motorola’s PV5300 industrial single-board computer represents the latest in high-performance embedded computing. Supporting Intel Pentium II processor Mobile Modules with speeds starting at 266 and 333 MHz, the PV5300 is a highly integrated computer hosting a robust array of I/O including USB, serials ports, parallel port, dual EIDE, Ultra SCSI, CompactFlash, AGP graphics with access to flat panel signals, and dual Fast Ethernet controllers. The PV5300 is PICMG compliant for use in PCI/ISA passive backplanes. Quite simply, Motorola’s PV5300 is the high performance leader for embedded application developers addressing high reliability, high-maintainability, real-time applications such as telecommunications/CTI, medical and scientific systems, industrial control and monitoring, and data acquisition.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 16MB Flash soldered on board (configured as secondary master IDE) with CompactFlash connector for expandability.
- 66 MHz/100 MHz front-side bus
- AGP graphics with access to flat panel signals
- Dual 10/100BaseTX Ethernet
- Pentium II processor Mobile Module
- Ultra SCSI and dual EIDE
- Up to 512MB SDRAM memory with ECC support
- USB, serial and parallel ports
Specifications
- Addressing: Real (20-bit) and protected (16-bit on bus access) supported
- Altitude: Operating: 15,000 ft. (4,572 m) | Storage/Transit: 50,000 ft. (15,240 m)
- BIOS Features: PhoenixBIOS™, in Flash EEPROM | Auto configuration, extended setup, and Plug-and-Play tables | Headless operation extensions | Programmable bus and I/O speeds, and memory wait states | Support for “memory hole” and C000–E000 address blocking | System, video, and SCSI BIOS shadowing | BIOS POST and Setup console redirection to serial port
- Bus Interface: PCI/ISA or ISA, PICMG and IBM PC/AT compatible | PCI Bus (120-pin), fully buffered (33/30 MHz) | ISA Bus (98-pin), fully buffered (8.33 MHz); up to 20 slots with 24 mA bus drivers
- Cache: 512KB or 256KB (dependent on processor)
- Clock/Calendar: Real-time clock with (replaceable) battery backup, includes 256-byte CMOS
- Data Paths: CPU Bus: 64-bit | PCI Bus: 32-bit | ISA Bus: 16-bit (ISA bus mastering)
- Demonstrated MTBF: (based on sample testing in accelerated stress environment) | TBD (target is 100,000 hours with 95% confidence)
- DMA channels: Four 8-bit, three 16-bit; supports scatter/gather, F-Type DMA
- EIDE: Bus master PCI-EIDE, support for four drives in master/slave configuration with LBA and PIO mode 0–4 support (one channel used for on-board IDE Flash disk)
- ELECTROMAGNETIC COMPATIBILITY (EMC): Intended for use in systems meeting the following regulations: U.S.: FCC Part 15, Subpart B, Class A (non-residential); Canada: ICES-003, Class A (non-residential) | Motorola Computer Group board products are tested in a representative system to the following standards (results pending): CE Mark per European EMC Directive 89/336/EEC with Amendments; Emissions: EN55022 Class B; Immunity: EN50082-1
- Ethernet: Dual PCI 10/100Mb Ethernet, 10Base-T/100Base-TX (Intel 82559)
- Floppy Disk: Support for two drives (360K to 2.88MB support)
- Headers: Two USB, two serial ports (10-pin shrouded), parallel port (26-pin shrouded), two Ultra EIDE (40-pin shrouded), SCSI-2 (68-pin micro D, wide receptacle), AT-style keyboard, EIDE and SCSI disk LEDs, and alarm monitor signals
- Humidity (NC): Operating: 10 to 85% @ 40° C
- Interrupts: 11, edge-sensitive and configurable | Four PCI, level-sensitive
- Mechanical: 13.32" x 4.80" (338 mm x 122 mm); conforms to IEEE P996 PC/AT bus, PCI Revision 2.1, and PICMG Revision 2.0 specifications
- Memory: Sockets: Two 3.3V DIMM sockets | DRAM Option: Up to 512MB SDRAM, 64- or 72-bit, 3.3V
- Parallel Port: One bi-directional port with all IEEE 1284 protocols supported (compatibility, nibble, byte, EPP, and ECP) with selectable IRQs and BIOS selectable addressing
- Power Requirements: +3.3V: 4.0 A | +5V: 5.5 A | +12V: 0.1 A | –12V: 0.1 A | Input power: 18W (for single 200 MHz without cache or DRAM)
- Processor: Single 266/333 MHz Pentium II processor Mobile Module
- Rear I/O bracket: PS/2 mouse and keyboard (6-pin Mini-DIN); SVGA (15-pin Dsub), two Ethernet (RJ45 w/ transmit/receive indicators)
- Reliability Features: Filtered serial connectors, SCSI terminator and keyboard voltage protected by selfresetting fuses. Board serial number in EPROM.
- Safety: All printed wiring boards (PWBs) are manufactured with a flammability rating of 94V-0 by UL recognized manufacturers.
- SCSI: PCI Ultra SCSI (Adaptec 7880, 8-bit fast, 16-bit fast/wide or mixture)
- Serial Ports: Two RS-232 (16550) w/ 16Byte FIFO, as COM1–4 with selectable IRQs and BIOS selectable addressing
- Supervisory Features: Software programmable, two-level watchdog timer (17.8 ms to 291 sec.) drives interrupts 5, 7, 9, 10, or 11, NMI, or system reset | Monitor micro-controller for backplane voltage, CPU temperature (user-definable threshhold alarm in IRQ 11) and fan speed with status interrogated locally through I/O or remotely through a two wire serial port.
- Temperature: Operating: 0° C to 55° C | Storage/Transit: –20° C to +60° C
- USB Ports: Two
- Vibration: Operating: 1 G RMS; 20-2000 Hz random | Storage/Transit: 6 Gs RMS; 20-2000 Hz random
- Video: AGP graphics with 2MB video SRAM (C&T 690xx); access to flat panel signals provided
Applications
- None Available
Aliases
- None Available
Related Items
PM603-033
Memory Module- P6SMB160AT3
P6SMB160AT3 - P6SMB33AT3
P6SMB33AT3 - P88X02
P88X02