MOTOROLA Industrial Partner

MVME2306 - Motorola MVME2306 Series VME Processor Module | CPU Board |...

larger image

Request Quote
For Price
Part Number:
MVME2306
Model Number:
MVME2306
Make:
MOTOROLA
Lead Time:
Available
Qty In Stock:
Available

Motorola MVME2306 Series VME Processor Module | CPU Board | 300 MHz MPC604, 32MB ECC DRAM, 5MB Flash Simple Type: CPU Board

The MVME2300 series of VME boards provides the performance of Motorola’s PowerPlus Architecture, and the ability to fully customize your application with two PCI mezzanine cards (PMCs). Utilizing Motorola’s MPC60x class 32-bit microprocessors, the peripheral component interconnect (PCI) bus for the on-board peripherals, processor-memory bus to PCI bus bridge, and a VME interface, the MVME2300 processor modules pack optimum levels of flexibility and performance into a single VME slot.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • None Available

Specifications

    General
  • [Asynchronous Serial Port] Connector: Routed to the front panel via an RJ-45
  • [Asynchronous Serial Port] Controller: PC16550
  • [Board Size] Depth: 160.0 mm (6.3 in.)
  • [Board Size] Front Panel Height: 261.8 mm (10.3 in.)
  • [Board Size] Height: 233.4 mm (9.2 in.)
  • [Board Size] Max. Component Height: 14.8 mm (0.58 in.)
  • [Board Size] Width: 19.8 mm (0.8 in.)
  • [Counters/Timers] Real-Time Timers/Counters: Four, 16-bit programmable
  • [Counters/Timers] TOD Clock Device: MK48T59; 8KB NVRAM
  • [Counters/Timers] Watchdog Timer: Time-out generates reset
  • [Environmental] Non Operating Humidity, Non Condensing: 5% to 95%
  • [Environmental] Non Operating Temperature: –40° C to +70° C
  • [Environmental] Non Operating Vibration: .5 G Sine Sweep 5–100 Hz; 3 G Sine Sweep 50–500 Hz
  • [Environmental] Operating Humidity, Non condensing: 5% to 85%
  • [Environmental] Operating Temperature: 0° C to +55° C
  • [Environmental] Operating Vibration: 1 G Sine Sweep 5–100 Hz
  • [Ethernet] Connector: Routed to front panel via an RJ-45
  • [Ethernet] Controller: DEC 21140
  • [Ethernet] PCI Local bus DMA: Yes
  • [IEEE P1386.1 PCI Mezzanine Card Slot] Address/Data: A32/D32/D64, PMC PN1, PN2, PN3, PN4 connectors
  • [IEEE P1386.1 PCI Mezzanine Card Slot] Module Types: One double-wide or two single-wide front-panel I/O or P2 I/O
  • [IEEE P1386.1 PCI Mezzanine Card Slot] Note: P2 I/O from PMC slot 2 is only accessible to systems equipped for VME64 extension connectors.
  • [IEEE P1386.1 PCI Mezzanine Card Slot] PCI Bus Clock: 33 MHz
  • [IEEE P1386.1 PCI Mezzanine Card Slot] Power: +3.3 V, +5 V, ± 12 V, 7.5 watts maximum per PMC slot
  • [IEEE P1386.1 PCI Mezzanine Card Slot] Signaling: 5 V
  • [Memory] Accesses: 9 read/4 write
  • [Memory] Architecture: 128-bit, 2-way interleaved
  • [Memory] Capacity: 1MB via two 32-pin PLCC/CLCC sockets; 4MB surface mount
  • [Memory] Capacity (50ns EDO): 128MB Single Cycle
  • [Memory] Cell Capacity Life: 10 years at 100% duty cycle
  • [Memory] Cell Storage Life: 50 years at 55° C
  • [Memory] ECC Protected Main Memory: Dynamic RAM with 66 MHz bus
  • [Memory] EEPROM/Flash: On-board programmable
  • [Memory] NVRAM: 8KB; 4KB available for users
  • [Memory] Read Access (1MB port): 260 clocks (32-byte burst)
  • [Memory] Read Access (4MB port): 68 clocks (32-byte burst)
  • [Memory] Read Burst Mode (50ns): 8-1-1-1 idle; 2-1-1-1 aligned page hit
  • [Memory] Read Burst Mode (60ns): 9-1-2-1 idle; 3-1-2-1 aligned page hit
  • [Memory] Removable Battery: Yes
  • [Memory] Write Burst Mode: 4-1-1-1 idle; 3-1-1-1 aligned page hit
  • [PCI Expansion Connector] Address/Data: A32/D32/D64
  • [PCI Expansion Connector] Connector: 114-pin connector located on the planar of the MVME2300
  • [PCI Expansion Connector] PCI Bus Clock: 33 MHz
  • [PCI Expansion Connector] Signaling: 5V
  • [Power Requirements] MVME2300 w/ MPC603 @ 200 MHz: 4.0 A typical, 4.75 A max.
  • [Power Requirements] MVME2300 w/ MPC604 @ 333 MHz: 5.0 A typical, 5.5 A max.
  • [Power Requirements] Note: Power requirements are PMC dependent at +12 and –12 volts.
  • [Power Requirements] Power: + 5 V ± 5%
  • [Processor] Clock Frequency: MPC603: 200 MHz, MPC604: 333 MHz
  • [Processor] Microprocessor: MPC603, MPC604
  • [Processor] On-chip Cache (I/D): 16KB/16KB 32KB/32KB
  • [VMEbus ANSI/VITA 1-1994 VME64 (IEEE STD 1014)] Arbiter: RR/PRI
  • [VMEbus ANSI/VITA 1-1994 VME64 (IEEE STD 1014)] DTB Master: A16–A32; D08–D64, BLT
  • [VMEbus ANSI/VITA 1-1994 VME64 (IEEE STD 1014)] DTB Slave: A24–A32; D08–D64, BLT, UAT
  • [VMEbus ANSI/VITA 1-1994 VME64 (IEEE STD 1014)] Interrupt Handler/Generator: IRQ 1–7/Any one of seven IRQs
  • [VMEbus ANSI/VITA 1-1994 VME64 (IEEE STD 1014)] Location Monitor: Two, LMA32
  • [VMEbus ANSI/VITA 1-1994 VME64 (IEEE STD 1014)] System Controller: Yes, jumperable or auto detect
  • Miscellaneous: Reset and Abort switches and four LEDs for Fail, CPU, PMC1, PMC2 on front panel
  • Processor: Motorola MPC60x Class

 

Applications

  • None Available

Aliases

  • None Available